FAQs

Aus NAS Wiki

Wechseln zu:Navigation, Suche

Inhaltsverzeichnis

I can't use USB stick connected to the NAS box

If you are able to see the USB Stick in Maintenance - Disk Utility select desired file system and use the format button.

Official answer from Support/RaidSonic Tec.: Please format this USB stick by our NAS before you use this drive.

After updating the firmware telnet is disabled on the NAS

It is more save to use the SSH package available on Raidsonic homepage. Or you can enable telnet by http://<ip-of-your-box>/cgi/telnet/telnet.cgi .


Cause: The directory /system/codb/objects/1 possibly missing the file Telnet.enabled and the corresponding entry in /system/codb/objects/1/_SCALARS.

Solution 1: (with ssh and putty package):

 echo -n 1 > /system/codb/objects/1/Telnet.enabled
 echo "Telnet.enabled," >> /system/codb/objects/1/_SCALARS

Solution 2: (with a user script, as a file "init" on public share, for example, applications / bugfixes):

 #!/bin/sh 
 killall inetd
 echo "telnet stream tcp nowait root /usr/sbin/telnetd telnetd" >> /etc/inetd.conf
 /usr/sbin/inetd

The file must be done with a "Unix-enabled" editor (only LF at end of line, no CR, LF)

In both cases you need a reboot of the NAS box for telnet to be reachable again.

What is the advantages of SSH against telnet

SSH (SecureShell) is an encrypted communictaion. Especially if the box will be accessed over the internet this protocol inhibits tapping of the traffic. So no password and different data can be recorded. On the other hand telnet sends it's data uncrypted. Therefore everybody can listen to it.

Ist es möglich eine wake on lan funktion per Software zu implementieren

NEIN Wenn die Box ausgeschaltet ist läuft auch keine Software. Das ist auch ob des Stromverbrauches im Spin-Down-Betrieb nicht sinnvoll. Der wäre bei beiden Varianten in etwa gleich, allerdings mit einer deutlich längeren Verzögerung beim Aufwachen des NAS verbunden.

Muss ich jedesmal nach einem neustart von Windows meinen Usernamen/Passwort eingeben

NEIN es gibt
a) die möglichkeit den Benutzernamen und pw beim anlegen eines Netzlaufwerks einen Namen/passwort zu speichern und
b.) meine bevorzugte lösung, eine Batch Datei im Autostart mit den manuellen mount befehlen

   ('net use LW: \\192.168.1.xx\music kennwort /USER benutzername')

Wie erreiche ich von aussen bei dynamischer IP meine Box

Am einfachsten richtet man sich bei einem Dienst wie DynDNS [1] eine kostenlose 'web Adresse' ein. Mittlerweile unterstützt jeder Router das Update der DynDNS Daten so das bei jeder neuen Einwahl die dynamische IP-Adresse aktualisiert wird. Dann muss man in seinem Router nur noch das Portforwarding auf Port 21 einrichten.

I can't access (Access is denied) to my shared folder(s) using Samba and Windows XP SP2

This error message may appear due blank password restrictions, if your account in Windows XP has no password and your shared folders are password protected.

   \\<your_computer> is not accessible. You might not have permission to use this network resource. 
   Contact the administrator of this server to find out if you have access permissions.
   Logon failure: user account restriction. Possible reasons are blank passwords not allowed,
   logon hour restrictions, or policy restriction has been enforced.

You have to turn off 'Use simply file sharing' and disable the entry 'Accounts: Limit local account...' using Group Policy editor (gpedit.msc).

To disable simple file sharing, follow these steps:
1. Click Start, and then click My Computer.
2. On the Tools menu, click Folder Options, and then click the View tab.
3. In the Advanced Settings section, clear the Use simple file sharing (Recommended) check box.
4. Click OK.

To disable limit of blank passwords, follow these steps:
Computer Configuration
-Windows Settings
--Security Settings
---Local Policies
----Security Options

-----Accounts: Limit local account use of blank passwords to console logon only - Disabled

can't access special character "Ä" (Umlaute) with linuxserver with smbmount

1. First select from ICY BOX webinterface <File and Print> > Fileserver and choose Characterset "Central European(CP1250)

2. Mount the NAS with the command:

   mount -t smb -o lfs,username=xxx,password=yyyy,uid=USER,gid=GROUP,codepage=cp1250   //10.1.1.11/SHARENAME /MOUNTPOINT
   xxx= username on ICY-BOX 
   yyy= password on ICY-BOX
   uid= username on Linux PC
   gid= group on linux PC
   SHARENAME= sharename on ICY-BOX
   MOUNTPOINT= mountpoint on linux PC
   lfs= files over 2GB


de:FAQs