Fantec MR-35DRN
Aus NAS Wiki
Technische Daten
| Type | |
|---|---|
| CPU | armv4l - FA526id(wb) rev 1 (v4l) |
| Memory | 128 MB |
| Datenübertragung | 5 Mbit/s (SMB Linux) |
| Schnittstelle | |
| Anschlüsse | |
| Festplatten | |
| Stromverbrauch | |
| Festplatten-Modus | RAID 0 , RAID 1, LINEAR |
| File Sharing | SMB , FTP |
Bilder
Datei:Db-s front.jpg Frontseite |
Datei:Db-s.jpg Rückseite |
Übersicht
Aufbau
Technische Details
dmesg
Linux version 2.6.15 (root@localhost.localdomain) (gcc version 3.4.4) #137 Mon Aug 4 13:57:04 CST 2008
CPU: FA526id(wb) [66015261] revision 1 (ARMv4)
Machine: GeminiA
Ignoring unrecognised tag 0x00000000
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 32768
DMA zone: 32768 pages, LIFO batch:7
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 0 pages, LIFO batch:0
HighMem zone: 0 pages, LIFO batch:0
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 2, 16 byte lines, 512 sets
CPU0: D cache: 8192 bytes, associativity 2, 16 byte lines, 256 sets
Built 1 zonelists
Kernel command line: root=/dev/ram0 rw console=ttySL0,19200 initrd=0x00800000,20M ramdisk_size=20480
PID hash table entries: 1024 (order: 10, 16384 bytes)
Bus: 150MHz(2/1)
sl2312 console setup :
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 128MB = 128MB total
Memory: 104320KB available (3496K code, 1219K data, 112K init)
Calibrating delay loop... 230.19 BogoMIPS (lpj=1150976)
Mount-cache hash table entries: 512
*** Page_chain_cachep Init!***
CPU: Testing write buffer coherency: ok
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 20480K
NET: Registered protocol family 16
PCI: bus0: Fast back to back transfers disabled
sl2312_pci_map_irq : slot = 0 pin = 1
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Initial RAID Descripter...
XOR:tx_desc = ffc00000
XOR:rx_desc = ffc01000
XOR:tx_desc_dma = 01b38000
XOR:rx_desc_dma = 01b39000
NetWinder Floating Point Emulator V0.97 (double precision)
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.25 [Flags: R/O].
JFFS version 1.0, (C) 1999, 2000 Axis Communications AB
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
SGI XFS with ACLs, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered
Real Time Clock Driver v0.10
Gemini Gpio init
Register Gemini Power control
Storlink CIR Initialization
Watchdog Timer Initialized
ttySL0 at MMIO 0x42000000 (irq = 18) is a SL2312
RAMDISK driver initialized: 16 RAM disks of 20480K size 1024 blocksize
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
NET: Registered protocol family 24
VSC-switch not found
Enter mac_init_drv()
phy_addr is 1
vendor is 0x01410e11
gmac[0] vendor id : 0x01410e11
test register value = 0x 7969set phy operation mode
pre_status is 74
set phy operation mode and status is 0
status1 is 1b
phy_addr is 2
vendor is 0x02430c54
gmac[1] vendor id : 0x02430c54
test register value = 0x 7849<6>SL351x Giga Ethernet driver 0.1.6 built at Aug 4 2008 13:54:57
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide 0: physical = 63000000, virtual = c8852000, irq = 4
ide0: MMIO-DMA , BIOS settings: hda:pio, hdb:pio
ide 1: physical = 63400000, virtual = c8854000, irq = 5
ide1: MMIO-DMA , BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: no response (status = 0xa1), resetting drive
hda: no response (status = 0xa1)
hdb: no response (status = 0xa1), resetting drive
hdb: no response (status = 0xa1)
Probing IDE interface ide1...
hdc: SAMSUNG HD753LJ, ATA DISK drive
hdd: SAMSUNG HD753LJ, ATA DISK drive
hdc speed:U6 (66MHz)(0x46)
hdd speed:U6 (66MHz)(0x46)
ide1 at 0xc8854020-0xc8854027,0xc8854036 on irq 5
hdc: max request size: 1024KiB
hdc: 1465149168 sectors (750156 MB) w/32767KiB Cache, CHS=65535/255/63
hdc: cache flushes supported
hdc: hdc1 hdc2 hdc3 hdc4
hdd: max request size: 1024KiB
hdd: 1465149168 sectors (750156 MB) w/32767KiB Cache, CHS=65535/255/63
hdd: cache flushes supported
hdd: hdd3 hdd4
SL2312 MTD Driver Init.......
SL2312 CFI Flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 7 MTD partitions on "SL2312 CFI Flash":
0x00000000-0x00020000 : "RedBoot"
0x00020000-0x00320000 : "Kernel"
0x00320000-0x00920000 : "Ramdisk"
0x00920000-0x00f20000 : "Application"
0x00f20000-0x00f40000 : "VCTL"
0x00f40000-0x00fe0000 : "CurConf"
0x00fe0000-0x01000000 : "FIS directory"
SL2312 MTD Driver Init Success ......
FTC_FOTG2XX : Init FOTG2XX Driver
Init FOTG2xx driver
FTC_FOTG2XX : >>> Found FOTG2XX ...
pFTC_OTG c6ef3200
FTC_FOTG2XX_1 : Init FOTG2XX Driver
Init FOTG2xx driver
FTC_FOTG2XX_1 : >>> Found FOTG2XX ...
pFTC_OTG_1 c6ef3140
hcd->self.controller c1b2d000
hcd end
hcd_buffer_create
ehci-hcd-FOTG2XX ehci-hcd-FOTG2XX: new USB bus registered, assigned bus number 1
usb_register_bus
ghcd_FOTG2XX hcd c1b2d000
hcd_irq_For_OTG
ehci->caps->length 10, hcd->regs f6800000 , ehci->regs f6800010
udev->state 1
drivers/usb/host/ehci-hcd-FOTG2XX.c: USB support enabled, EHCI rev 101. 0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
FTC_FOTG2XX : >>> +FOTG2XX_get_otg_transceiver
FTC_FOTG2XX : registered host c1b2d000
OTG2XX act as HOST only (don't need to wait gadget driver)
+(OTGC_Init)
pFTC_OTG->otg.default_a=1
+(OTGC_Init)
pFTC_OTG->otg.default_a=1
OTG_enable_VBUS
FTC_FOTG2XX : >>> Drive VBUS ok...
+OTGP_Close()
OTG2XX act as HOST only (remove gadget function)
+OTGH_Open()(0x30=0x0)
OTG_enable_VBUS
mdwOTGC_Control_A_VBUS_VLD_Rd 80000
+OTGP_Close()
OTG2XX act as HOST only (remove gadget function)
+OTGH_Open()(0x30=0x0)
ehci otg_set_host status 0
connect_change 1
clear_bit
return set_bit
hcd->self.controller c1964800
hcd end
hcd_buffer_create
ehci-hcd-FOTG2XX-1 ehci-hcd-FOTG2XX-1: new USB bus registered, assigned bus number 2
usb_register_bus
ghcd_FOTG2XX_1 hcd c1964800
hcd_irq_For_OTG_1
ehci->caps->length 10, hcd->regs f6900000 , ehci->regs f6900010
udev->state 1
drivers/usb/host/ehci-hcd-FOTG2XX-1.c: USB support enabled, EHCI rev 101. 0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
FTC_FOTG2XX_1 : >>> +FOTG2XX_get_otg_transceiver_1
FTC_FOTG2XX_1 : registered host c1964800
OTG2XX act as HOST only (don't need to wait gadget driver)
+(OTGC_Init_1)
pFTC_OTG_1->otg.default_a=1
+(OTGC_Init_1)
pFTC_OTG_1->otg.default_a=1
OTG_enable_VBUS
FTC_FOTG2XX_1 : >>> Drive VBUS ok...
+OTGP_Close_1()
OTG2XX act as HOST only (remove gadget function)
+OTGH_Open_1()(0x30=0x0)
OTG_enable_VBUS
mdwOTGC_Control_A_VBUS_VLD_Rd 80000
+OTGP_Close_1()
OTG2XX act as HOST only (remove gadget function)
+OTGH_Open_1()(0x30=0x0)
ehci otg_set_host status 0
connect_change 1
clear_bit
return set_bit
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid10 personality registered as nr 9
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
gemini xor acceleration: 47.200 MB/sec
raid5: using function: gemini xor acceleration (47.200 MB/sec)
md: multipath personality registered as nr 7
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
ipsec_init : cryptographic accelerator
ipsec tx_desc = ffc7d000
ipsec rx_desc = ffc7e000
ipsec tx_desc_dma = 00636000
ipsec rx_desc_dma = 00637000
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
ip_conntrack version 2.4 (1024 buckets, 8192 max) - 252 bytes per conntrack
ip_conntrack_pptp version 3.1 loaded
ip_tables: (C) 2000-2002 Netfilter core team
arp_tables: (C) 2002 David S. Miller
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
md: Autodetecting RAID arrays.
md: autorun ...
md: considering hdd3 ...
md: adding hdd3 ...
md: adding hdc3 ...
md: hdc2 has different UUID to hdd3
md: hdc1 has different UUID to hdd3
md: created md1
md: bind<hdc3>
md: bind<hdd3>
md: running: <hdd3><hdc3>
md: considering hdc2 ...
md: adding hdc2 ...
md: adding hdc1 ...
md: created md0
md: bind<hdc1>
md0: WARNING: hdc2 appears to be on the same physical disk as hdc1. True
protection against single-disk failure might be compromised.
md: bind<hdc2>
md: running: <hdc2><hdc1>
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 112K
kjournald starting. Commit interval 5 seconds
EXT3 FS on md0, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on md0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on md1, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
vendor is 0x01410e11
GMAC-0 Addr 1 Vendor ID: 0x01410e11
mii_write: phy_addr=0x1 reg_addr=0x4 value=0x5e1
mii_write: phy_addr=0x1 reg_addr=0x9 value=0x300
mii_write: phy_addr=0x1 reg_addr=0x18 value=0x41
mii_write: phy_addr=0x1 reg_addr=0x0 value=0x9200
mii_write: phy_addr=0x1 reg_addr=0x0 value=0x1200
Link Up (0x796d) MII REG 10 = 0x3c00
1000M/Full
Flow Control Enable.
read Phy reg value is 0x00000074
Phy reg status is 0x0000007d
Storlink eth0 address = 005056C030DD
Enable MAC Flow Control...
rt2561ap: module license 'unspecified' taints kernel.
tp_base_addr: -167714816
test status 0x0000001bvendor is 0x02430c54
GMAC-1 Addr 2 Vendor ID: 0x02430c54
mii_write: phy_addr=0x2 reg_addr=0x4 value=0x5e1
mii_write: phy_addr=0x2 reg_addr=0x9 value=0x0
mii_write: phy_addr=0x2 reg_addr=0x18 value=0x41
mii_write: phy_addr=0x2 reg_addr=0x0 value=0x1000
Link Down (0x7849) MII REG 10 = 0x0
MII REG 5 (bit 5:15) = 0x0
Flow Control Disable.
read Phy reg value is 0x0000001b
Phy reg status is 0x00000050
Storlink eth1 address = 005056C030DE
Disable MAC Flow Control...
Adding 522104k swap on /dev/hdd4. Priority:-1 extents:1 across:522104k
Adding 522104k swap on /dev/hdc4. Priority:-2 extents:1 across:522104k
FANTEC> cat /proc/cpuinfo
Processor : FA526id(wb) rev 1 (v4l) BogoMIPS : 230.19 Features : swp half CPU implementer : 0x66 CPU architecture: 4 CPU variant : 0x0 CPU part : 0x526 CPU revision : 1 Cache type : write-back Cache clean : cp15 c7 ops Cache lockdown : format B Cache format : Harvard I size : 16384 I assoc : 2 I line length : 16 I sets : 512 D size : 8192 D assoc : 2 D line length : 16 D sets : 256 Hardware : GeminiA Revision : 0000 Serial : 0000000000000000
ps ax
PID Uid VmSize Stat Command 1 root 544 S init 3 root SWN [ksoftirqd/0] 4 root SW [watchdog/0] 5 root SW< [events/0] 6 root SW< [khelper] 7 root SW< [kthread] 15 root SW< [kblockd/0] 18 root SW< [khubd] 60 root SW [pdflush] 61 root SW [pdflush] 63 root SW< [aio/0] 66 root SW< [xfslogd/0] 62 root SW [kswapd0] 64 root SW [cifsoplockd] 65 root SW [cifsdnotifyd] 67 root SW< [xfsdatad/0] 68 root SW< [xfsbufd] 631 root SW [mtdblockd] 667 root SW< [md1_raid1] 668 root SW< [md0_raid1] 738 root SW [kjournald] 784 root SW [kjournald] 885 root SW [eth0] 898 root 1072 S /usr/sausalito/sbin/cced 921 root 556 S /usr/sbin/inetd 1001 root SW [eth1] 1159 root 708 S /sbin/syslogd 1237 root 496 S mdadm --monitor --program=/usr/sausalito/handlers/base/raid/monitor --delay=5 /dev/md0 /dev/md1 1301 nobody 792 S proftpd: (accepting connections) 1314 1 340 S /usr/hddapp/sbin/portmap 1322 root SW [nfsd] 1323 root SW [nfsd] 1324 root SW [nfsd] 1325 root SW [nfsd] 1326 root SW [lockd] 1327 root SW< [rpciod/0] 1332 root 264 S /usr/hddapp/sbin/rpc.mountd 1358 daemon 400 S lpd Waiting 1397 root 1912 S /usr/hddapp/sbin/smbd -D 1399 root 660 S /usr/hddapp/sbin/smbd -D 1400 root 1120 S /usr/hddapp/sbin/nmbd -D 1440 root 592 S /usr/sbin/crond 1453 root 260 S /usr/sausalito/sbin/storudp 1456 root 532 S /usr/sausalito/handlers/base/power/powermgmt 1473 root 592 S /usr/sbin/crond 1479 root 912 S /usr/sbin/thttpd -C /etc/thttpd.conf 1481 root 624 S /sbin/upnpdevice 1487 root 532 S /sbin/getty 19200 console 1552 root 396 S telnetd 1553 root 800 S -ash 1560 root 636 R ps ax
Einrichtung
Performance
Fazit und Vergleich
Diskussionstons-Forum
THIS WIKI SUC...
Bilder
Datei:Db-s front.jpg Frontseite |
Datei:Db-s.jpg Rückseite |
Übersicht
Aufbau
Technische Details
Einrichtung
Performance
Fazit und Vergleich
finger weg!
Diskussionstons-Forum
Testberichte
Links
Fantec
